Judah Drywall Partition solutions are non load bearing, light weight, easy to install, yet robust –comprising of plasterboards screw fixed on either side to UC metal structures (Tracks and Studs), with joints taped and filled to get even smooth and homogenous surface.

• Low weight in comparison to masonry walls of comparable thickness
  • Enhances saving in structural design
  • Suitable for high rise buildings
• Quick and Easy to install
  • Cost effective
  • Reduced Project completion time
• Performance
  • Fire protection – up to 1 hrs
  • Sound Insulation – up to 51 dB
  • Enhancement of fire & acoustic performance can be achieved by increasing the number of layers of plasterboards
  • Filling the cavity with insulation enhances the acoustic performance

Used as Partitions in commercial and residential buildings.

J1-Series–partition with single layer boards on either side of the UC metal structure.

Judah Drywall Partition solutions are non load bearing, light weight, easy to install, yet robust –comprising of plasterboards screw fixed on either side to UC metal structures (Tracks and Studs), with joints taped and filled to get even smooth and homogenous surface.

• Low weight in comparison to masonry walls of comparable thickness
  • Enhances saving in structural design
  • Suitable for high rise buildings
• Quick and Easy to install
  • Cost effective
  • Reduced Project completion time
• Performance
  • Fire protection – up to 3 hrs
  • Sound Insulation – up to 57 dB
  • Enhancement of fire & acoustic performance can be achieved by increasing the number of layers of plasterboards
  • Filling the cavity with insulation enhances the acoustic performance

Used as Partitions in commercial and residential buildings.

J2-Series–partition with multiple layer boards on either side of the UC metal structure.

Judah Drywall Partition solutions are non load bearing, light weight, easy to install, yet robust –comprising of plasterboards screw fixed on either side to UC metal structures (Tracks and Studs), with joints taped and filled to get even smooth and homogenous surface.

• Low weight in comparison to masonry walls of comparable thickness
  • Enhances saving in structural design
  • Suitable for high rise buildings
• Quick and Easy to install
  • Cost effective
  • Reduced Project completion time
• Performance
  • Fire protection – up to 3 hrs
  • Sound Insulation – up to 61 dB
  • Enhancement of fire & acoustic performance can be achieved by increasing the number of layers of plasterboards
  • Filling the cavity with insulation enhances the acoustic performance

Used as Partitions in commercial and residential buildings.

J3-Series–partition with multiple layer boards on either side of the UC metal structure.

JH Series – used for very high acoustic partitions, comprises of multiple layers of gypsum boards screw fixed on the outer side of the UC structure having parallel row of tracks and studs. The parallel rows of studs are braced by plasterboards or by metal profiles or by metal profiles through Acoustic V-brace, at defined horizontal heights for various acoustic performance requirements. Filling each stud cavity with acoustic insulation blanket, will enhance acoustical insulation as will do the sealing of the perimeters with Fire and Acoustic sealant that is at the same time providing the necessary air-tightness in case of fire.

Performance

• Fire protection – up to 3 hrs
• Sound Insulation – up to 72 dB

JS Series – used for acoustic partitions, comprises of single or double layers of gypsum boards screw fixed on the outer side of the UC structure having staggered row of studs, brace between top and bottom tracks and/or guide angles. The studs are not braced horizontally. Filling partition cavity with acoustic insulation blanket, will enhance acoustical insulation as will do the sealing of the perimeters with Fire and Acoustic sealant that is at the same time providing the necessary air-tightness in case of fire.

Performance

• Fire protection – up to 2 hrs
• Sound Insulation – up to 61dB

JW Series– Uses traditional UC metal structure (tracks and stud) in a front of the wall to be lined. Thus enclosing any services and also provide cavity of adding insulating material. On the external side of the metal structure the gypsum plasterboards are screw fixed with its joints, treated (taped and filled) to achieve the even, smooth and homogenous surface.

GL Series– Uses Furring channel or C- studs  fixed on to the wall directly or on to adjustable brackets fixed on the walls. On the external side of the metal structure the gypsum plasterboards are screw fixed with its joints, treated (taped and filled) to achieve the even, smooth and homogenous surface.

GZZ Series – used in very high acoustic demanding applications. High acoustic insulation is obtained by wrapping the cinema hall with an individual cinema wall liner comprising of multiple (up to 4) layers of gypsum boards screw fixed on the open side of the counterbalanced Z-Z stud structure fixed between the acoustic head bracket at the top and to the base angles at the bottom. Adjacent cinema halls with common wall, shall be considers as two back to back liner walls without any connection between them. Filling the stud cavity of each liner wall with acoustic insulation blanket, will enhance acoustical insulation as will do the sealing of the perimeters with Fire and Acoustic sealant that is at the same time providing the necessary air-tightness in case of fire.

Advantages

• Light weight (in comparison to concrete / block-work)
• No need for structural reinforcements nor bracings
• Dry & high-speed installation
• “Easily understood” junctions with different structures
• Not only provides high acoustic performance also provides high resistance to fire

Performance

• Fire protection – up to 2 hrs
• Sound Insulation – up to 75 dB( with sound stop ceiling / bulkhead)

Applications

• Cinemas – in particular Multiplex Cinemas – Heights up to 18 SQFT
• Auditoriums (Operas, Concert Halls, Universities) – up to 40 SQFT
• Hotels (Halls, Ballrooms, Technical Floors) – up to 33 SQFT

JSS Series–Sound Stop Concealed ceiling consisting of galvanized steel main channels fastened to a slab/steel by KMUL anchors / brackets by threaded rods supported by Phonic U-hangers to which cross-wise running furring channels are screw-fixed using wafer head screws at each intersection. Multiple (upto 4) layers of fire rated gypsum boards, all joints staggered from layer to layer, are screw-fixed to the underside of the furring channels. Taping and jointing of the face board provides a smooth continuous surface ready to be painted. A glass wool blanket is unrolled on top of the system

Judah Ceiling Solutions – comprising of a grid of completely concealed suspended metal frames (void of wire hangers and wire-clips) lined with gypsum plasterboards with its joints, treated (taped and filled) to achieve the even, smooth and homogenous surface – to receive paint or further decoration.

• Light weight and versatile
  • Curvature and other special designs possible
  • Supports in concealing cableways, ducts etc
• Very Quick and Easy to install
  • Cost effective
  • Reduced Project completion time
• Performance
  • Fire protection – up to 2 hrs
  • Sound Insulation – up to 70 dB (when used under a concrete floor)
  • Enhancement of fire & acoustic performance can be achieved by increasing the number of layers of plasterboards
  • Filling the cavity with insulation on the back of the ceiling enhances of acoustic performance

Read More

Ceiling solutions – comprising of a grid of completely concealed suspended metal frames (void of wire hangers and wire-clips) lined with gypsum plasterboards with its joints, treated (taped and filled) to achieve the even, smooth and homogenous surface – to receive paint or further decoration.

• Light weight and versatile
  • Supports in concealing cableways, ducts etc
• Quick and Easy to install
  • Cost effective
  • Reduced Project completion time
• Performance
  • Fire protection – up to 2 hrs
  • Sound Insulation – up to 70 dB (when used under a concrete floor)
  • Enhancement of fire & acoustic performance can be achieved by increasing the number of layers of plasterboards
  • Filling the cavity with insulation on the back of the ceiling enhances of acoustic performance

GC Series– Suspended concealed system with Single or multiple layer Gypsum plaster boards, suitable for fire rated and non-fire rated ceiling systems.

ALUMINIUM GRID CEILING SYSTEM

Shaftwall System consists of 1″ shaftliner panels supported by 2-1/2″, 4″ or 6″ C-T Studs and faced on one side with two layers of 1/2″ fire code board.

Stairwall Systems are designed to enclose stairwalls, this system is finished on both sides with a single layer of 1/2″ Judah fire wall board.

Shaftwall systems are interior nonload-bearing fire rated wall assemblies that provide critical, life safety, fire-resistant protection for elevator shafts, stairwells, vertical chases and mechanical enclosures. Shaftwalls in elevators and stairwells are one of the most important wall assemblies in a building. They provide the only means of evacuation from the building in an emergency. Vertical chases and mechanical enclosures keep vital communication, power, water, fresh air and exhaust systems intact when a fire occurs.

Judah shaftwalls are lightweight, install faster, and provide lower inplace costs. They also significantly reduce structural framing and foundation costs.

In addition to substantial weight reduction, Judah shaftwall assemblies can be installed from the exterior of the shaft at each floor, eliminating the need for scaffolding. Shaftwall installation is easy, quick and clean. Light-gauge steel and gypsum assemblies provide fast, lightweight, low-cost and high-performance assemblies.

JSB Series – comprises of double layer partition, with expanded mesh fixed between the two layers on the attack side(s) and fixed upto the security protection height. It offers considerable resistance for a person(s) to break through the wall with sniping tools. Alternatively sheet steel of 1.2mm thick can also be used.

JCSB Series – comprises of double layer ceiling with expanded mesh fixed between the two layers.

Performance

• Fire protection – up to 3 hrs
• Sound Insulation – up to 57 dB

JSX Series – comprises of double layer partition, with single layer of X- Ray board fixed up to the X-ray protection height on the inner layer of the side facing the X-ray source. The X- ray board consists of 3mm lead sheet laminated on a special gypsum board.  Lead strips of 3mm thick x 40mm width is glue fixed on the metal studs along the flanges facing the X-ray source before installing the boards.

Performance

• Fire protection – up to 2 hrs
• Sound Insulation – up to 58 dB